Recent content by Davross22

Remember to check for any inline fine micron filters!

Interesting. I've never heard of that happening before. Goes back to the illimitation process and never assume the simplest items are working. Thanks for joining Hamotech.

Absolute great videos! That drive motor service was the best for me. Much appreciated.

Welcome there buddy. Nothing is impossible here. It may take a while however we're all here to help when we can.

Hi . How did you go buddy. I searched on the web via Bing. there is plenty there depending on engine fitted and what area you want.

I have a 743 in my collection and its a little different. I have the Kabota engine. If you cannot find the serial Number look at the front of the machine on the outside, basically in front of your left foot. the numbers were stamped there as well. I hope this helps.

Excellent job ggeh19

Great job guys, love it. I have a hughes backhoe attachment. Its great, however the machine runs out of weight and downward pressure. its all comparable I suppose, but you guys have done well. Im thinking I will build one soon. I may knock the pin out of the angle blade and adapt to that, using...

Great Idea using the smoke machine, love that. It would be a worry if the smoke started to come out the axle seals. I think we would know that leak before that action was performed. Anyhow back to the chain case. What oil are we putting in the 743 cases these days? I've been using a cheap...

was this ever solved? did this machine have a four in one bucket, the problem may be in the control valve for the auxiliary!

North Idaho Wolfman, Great Idea. That would work, yes. I've done three now and they've all had the radiator in. Not for any particular reason except which part has been completed first. Ive looked at this project, not as a task, but a bonus. All the little things one finds, some of which, will...

Hi guys. Removing the engine isn't as bad as you think. Gives you a chance to have a look and replace other things that arnt doing soo well. the spline just pushes on so little problem there as well. I put a couple of 2x2 under the engine and slowly winched out with my tiedown strap from the...

I Aus I run a hughes backhoe attachment on my 643. I had to make up the lugs on the front of the machine and change the quick hitch frame. works real good for what it is.

Hi Gents I was keen to know if there was fix for this ? I agree with Lowe.Buuck. The case drain is overlooked regularly. the pressure will have to be tested at the drive motor and other intervals until its determined where and if this is the case. What we tend to forget is the old hoses sit in...

Hi all. yes again, this is an old post. I'm still chasing a Lap bar to suit a 643, 743, 645, 653, &751 part number 6716778. There's one available from Clark, at a ridicules price. We're located in SE Queensland. we can borrow one and copy if someone would lend. Complete rebuild is nearly...