Recent content by Contractor

Thanks Tazza, that someone was me :). I know better than that, but fortunately it was sitting there. Made all the difference..

Well it turns out when I pulled the injectors to have them tested, I found a spring on top of the injection pump. It belonged in the #1 delivery valve. Put it back in, torqued everything and it’s running like new.

We had an S185 that did the exact same thing. This was 13 years ago but I recall the relay/fuse compartment had some loose sockets and the relay pins were making intermittent contact and causing all sorts of issues. I think I took it apart and that helped. Also making sure all grounds- including...

Hi all. We have a 2004 S185 V2203 with 4134 hours on it. I recently replaced the cylinder head due to a crack after a few overheating cycles in the field. The machine sat in our yard for 2 years until I brought it in to try to revive it. I replaced the head, water pump, and thermostat. It runs...

Thanks Dan! I did find a few on Ebay, also have the local Kubota dealer here trying to source one. If not eBay it is

Our oldest bobcat was overheating and had basically just been abandoned in our yard. I finally brought it into the shop and pulled the head. As Tazza has stated in other posts it most likely wasn't just a head gasket, it was cracked from he water jacket to the outside corner. I also pulled one...