Recent content by cmkruse

Ok THANKS, lots of good information. I think Ill take your advice and just reposition the one I got from Wengers and drill some new mounting holes. i just have to check on clearances as there is some cable pullies in the area. It wont be original but should work. Its still interesting to me that...

Here's the best I can do with my scanner. I have the color codes if you need them

I would also like to know if any options are available.

Service manual - volume 2 has the schematic/wiring diagram

Can you find the production number in the cab , lower left side down low. If so you can determine the year and get a manual. I have one for my 1835c in the manual. what exactly are you havijng problem with

Well My battery mounting plate was rusted away so I thought Id replace it. I removed all the old pieces and discarded them (mistake) and then I started looking on line for a replacement. Well I guess these things are like hens teeth and rare as can be. I finally found a used one from Wengers...

Anybody have a source for a replacement cable (H673321)? Internet search didn't come with anything. I haven't removed it yet. I'm hoping to be able to free it up if its just stiff in the case but just in case I'm looking for a new one/source. Any help will get you good Karma for the day:)

Update – Carb removed there is no ID tag or number on the carb. Used the gasket to match to a kit, rebuilt the carburetor using some of the small parts, but did not change the jet due to concerns expressed in another forum post about case using different jets for different models. Reinstall the...

Update – thanks to forum members. I located a universal kit that matched my gasket. We rebuilt the carburetor, primarily just a good cleaning job and replaced some small parts. We avoided. changing the Jets based on the information here and concern over using the incorrect one. Today we...

Do you still have any of the parts left. I need a carb and fuel pump and maybe some other stuff

1835C carb

Update- with help from a friend we got the carb off. Unfortunately there is no I’d tag. Here are some pictures of the carb and main gasket. If any one can tell me the model number then I can tr try and find the right kit. It took two hours working thru the side but we got it finally I really...

Thank you for the information . IT should make it a lot easier to get the number now.

Thanks for the info. Ill look for a number on the carb when i get it out

Thanks Ill check him out as soon as I get a number off the carb.