brdgbldr's latest activity

First thing I would do is change out the ignition switch.

I found the problem with the vane pump. The center section was flipped for CCW rotation. I flipped it so the arrow on the center section...

I figured out the problem with my vane pump. It was set up for CCW rotation. I flipped the center section of the vane pump around and...

Put the machine on blocks, remove the wheels, put a wrench on the axle bolt and allow the wrench to jam against the housing, use a long...

Here is a link to the parts catalog: https://partscatalog.bobcat.com/

Found a hairline crack in the pipe coming off the muffler.... stitched it and made a cap for extra support...... solid as a rock now..

I believe that a closer match to that engine is actually the Ford Kent mainly sold in Europe. But I do know that some of the Pinto parts...

Not sure about your lines. That steel loop on the arm is used sometimes to get hoses up and out of the way. You can loop the lines...

Could be the governor. Most were neglected and oil never changed or kept full. If it is the Mitsubishi engine. I had problems with the...

Sorry, I don’t have that one. The tubes I have are the ones that attach to the lift arms.

I have a couple of auxiliary hard lines…new old stock. If you look up the parts numbers that you need for the auxiliaries and get back...

first off I'm NO expert here,and I have never replaced that exact hose on your exact model, But it looks like both ends are not that bad...

Whenever I hear “squeal” I think loose or worn v-belt. If this is the type of “squeal” you are hearing, check your belts and maybe try...

Glad to hear you found it. I absolutely hate electrical problems!

Taaaaaa daaaa thanks everyone!! I found the wire that was broke, spliced it and WaaaaLaaaa!!! Appreciate all the help!!!