Recent content by Boyce18

Looks like the controller is probably shot in my machine, going to have to bring it to the dealer and see what they say. I guess it looks like you can not replace the controller your self.

Yes if you jump out the starter it runs but it will not move

I did look at it a little more today. The only thing I found is that I have 12.4 volts to the ignition key but when I turn the key to the on position the voltage drops to 8.4. Don’t know why. Voltage at the left panel stays at 12.4

Thought I had it in there, [email protected]

It’s not the relay, I did swap them check all fuses and swapped out the battery. For some reason it just seems that the left panel is not working as it should, no light on it come on it just says input

I have a 2001 bobcat 863 that will not start. left panel says “input”. I have power to the right panel and left panel (red wire/white stripe) power to the ignition key, and when key is tuned it puts power to the left panel also. All wires and fuses are good. Barrowed a spare left is panel and...