Recent content by boomtruck1

Hello everyone, I have been doing alot of reading of people's opinions on power down, floating with the arms because of more weight being applied, or floating without the arms like a conventional truck plow, so here is the idea I came up to cover all three ideas. I made a fixture to do just...

Found time today to work on my problem, I took the end caps off both sides of the auxillary spool and it was free both ways then I noticed the washers on the spool looked different so I removed them turned them around so they fit the springs. Put it back together try it and it dead heads both...

Thanks for the help. I called Bobcat today to get a relief and they dont have one said they will let me talk to a tech I told him the same stuff he said he has to research it. My question is where on my valve would I look for the relief valve so I can remove it . clean and reistall. What I...

Thanks for the help I only have a cap there so your saying I need to get a relief valve. I will get one and give it a try with an update.

Sorry it has taken so long to get back on here, I still have the same problem just been too busy to work on it. I have changed out the stems for brand new ones and I did switch the old stems around and switched the new ones. Switched the coils around also, no change. I do have voltage at the...

I have a 763 that on the auxillary hydraulics, it will open my four-in-one bucket but it will not close. I have changed spools, I have changed the coils from one to the other, it still opens but will not close. Bobcat replaced seals in valve body, said everything looks good but they can't figure...