Recent content by Bobcat_S250

S250 Bucket Tilt leaks down / drops very quickly! even with empty bucket Loud Hyd noise like Relief Valve venting when trying to lift load with Tilt. I suspect problem might be failure of 6678552 RELIEF Valve ANTI-CAVITATION? There is no leak up if I raise front of loader by tilting down...

Hi Gearclash: My 2003 S250 Bucket Tilt bleeds down in about 20 Sec. If I lift the front wheels with Bucket Tilt, it holds. No bleed up. It seems to me that if the Cyl. Piston Seals were leaking it would bleed up the same as down? In this case it seems more likely a pressure relief for Tilt...

Hi! I have exactly the same problem also! Any info about a solution would be appreciated! I'm in a remote location to taking the Bobcat to a dealer is a very expensive & time consuming option! Would be nice to have better support from Bobcat. Very little info in the Service Manual about the...

Hi, I have the same problem. Paid $250 CAD for wiring diagrams from Bobcat. I see the R/W power wire to the Key Switch runs through the controller / Computer & then through the 6678681 Right Cab Panel for some reason. Very difficult to remove the heavy steel cover to access the controller. Now...

Could you email me your diagrams? I have a 14 Pin & 16 pin going to the cab & no power on red /wht wire to cab controls. [email protected]

FOR: 2003 BOBCAT MODEL S250, SN: 521315759: No power to Cab Controls. I need wiring diagrams to troubleshoot? Diagrams might be in Bobcat Service Manual # 6901926PDF? Wiring to & from 14 Pin & 16 Pin Connectors under Seat to Cab. Especially the Hot power wires. Colour Red w White Stripe. Thanks!

Hi, I am having the same problem! Did you eventually find what was wrong?

Unable to remove hose from Hyd Oil Filter to drain. No space to swing wrenches! Any ideas