Recent content by bison

Cage rollers rolling freely?.. track adjusting bolts in the same holes each side?. did you try swap tracks left to right,see if it follows the track? Front/rear axles running in line and square to the frame. Uneven high/low sides on the cage rollers might be an issue,a belt allways wants to...

I'm looking for a used shop/repair manual for a 2000-2002 3054T cat engine. Catterpillar wants way to much for one and perkins don't have them,neither does ASV

maybe the brg on the outside of the planetary/cage drive is busted.. How are the lugs on the tracks?,if they are tapered badly they might want to climb the cage.

i would first check the quik couplers,sound like it the relief valve makes overtime.

well i guess if oil gets out trough the seals,dirt and water can get in,that's why i figured on using sealed brgs. I think i'm gonna try it,if they last a 1000 hrs i'll be happy,by that time the tracks will be shot and have to come off again anyway. I won't be doing custom work anyway so down...

I found some track roller axle brgs where shot on my ASV 4810 cause all the gear oil had leaked out(not visable at purchase) on most other axles as well. New Seals are $35 a piece,gets costly replacing them at $75 per axle + $30 for brgs. I was thinking of using the old seals and new sealed...

If there are only 2 factories in the world making these tracks,would OEM tracks not come from the same places? Did anyone import tracks themselves? I seen on the web one can get them FOB factory for $2200 a pair. OEM is over 6 grand for a pair for my ASV 4810

I got it fixed,was a broke spring in a loadvalve. Thanks Tazza

Anyone?

Damn thing is,a true repair and trouble shooting manual is not avalable for these ASV loaders(at least none i can find).And the parts breakdown shows only the assembled control valve,no exploded view or individual parts. Loader drop only occurs when warmed up,no drop when cold.

take the valve to a engine rebuilder and have the parts magna fluxed,i bet you got a cracked valve body

I got a little(or not so little) problem. Every time when raising the loader,the Loader drops 8 0r 10" after letting go of the joystick,but holds steady after that. Position of the loader don't matter. I thought maybe the cyl seals where shot,but after taking the cylinders apart the seals look...

hi there,i'm from Peace River AB. I'm looking to aquire a skidsteer to do some brush cutting and mulching on my ranch. I was looking for some input as to what equipment would work the best. I got my eyes on a ASV 4810 with a davco 705 brush cutter and fecon bush hog mulcher,just trying to find...

watching your vid,it looks like identical vegetation to what i need to remove. And yes, the ASV is a far heavier machine than the bobcat,its got a 35 gl/min pump on it,the davco is rated for up to 6". The erskine vid did not want to load

Newby here,Hi to all I got my eye on a used unit. Any body here run a 8410 with a Davco brush cutter? What you think of it,how does it work for clearing out light aspen and willow bush up to 6" ,(most is 1 to 3") thick Is there anything better out there i should look at Thanks