Recent content by BellH

I saw a video on youtube that said to disconnect the hoses and install plugs on the ends. Then push the lever forward , it should cause the engine to start to stall as if the wheels were locked up if pressure is getting to the motor. If it doesn't then the problem is the pump. Can you fill me in...

I can make the right side move in reverse but not forward. It seems a little weak in reverse as well. Any ideas? It leaks oil and when I top it off it moves forward but not as strong as the other side.

I'm wondering how I can convert my loaders idiot lights to gauges. I'd like to start with the temperature gauge. I have a temperature gauge from a 70's ford van , as far as I know you put the wire from the sensor on one terminal of the gauge plus current then the other terminal goes to ground. I...

My tractor has weak drive on the right side it gets worse at some times and nearly disappears at others It seems like it's only weak if I go forward but seems normal in reverse. Could this be a valve problem? On occasion the left steering lever can get stiff in one spot . If I pull harder it...

Hello I have a Mustang 930 A with a bad ignition switch, I wired up a toggle switch and it works fine but I'd like to get the charging system working. I think the power goes to the middle of the switch and there are 3 posts around the perimeter of the round back. I think as you trip the polls in...

Does anyone have a link to a 930A manual online?

Does anyone have a shot of the instrument cluster of a 90's mustang 930 A? I'm replacing the bezel with the instruments and warning lights and I got the lenses out of sequence. I know where each light goes but I the lenses with the icons on them are all mixed up.