Recent content by atnvol

I need a good Hydraulic oil tank that doesn't leak for a 763G. Part # 6718317. It needs to fit S/N 512250001 and above.

Ok I am up and running again. The in tank pick up line had broken off about 3" below the 90° fitting. Changed the engine oil and filter , the fuel filter and the hydraulic oil filter too. I appreciate everyone who took the time to offer solutions. I feel renewed with it up and running. Thanks folks!

I will update in a few days. I am going to the dealership today to get a pickup tube, grommet, clamps and screen. I sure hope this will take care of it but we will see. Appreciate you KyMadMan.

I just talked with a fella that used to work at the Bobcat dealership as a road tech. He said he would just about guarantee me that the pickup line in the tank has broke off.

When this storm passes I will Try leaving the injection pump valve open, pumping the bulb a few times and then try to fire it.

I did try to crank it but it did nothing other than one time it acted like it was trying to hit but did not. I never could get all the air from the filter and it just would never build up any pressure at the injection pump. It is just not sucking enough fuel in the line when pumping with the bulb.

Ok I just come in from checking it out. I am now thinking it is possible I could have ran it out of fuel or it was so low it was not being picked up on the slope I was working on because I did empty the fuel can (2 gals.) into it. So I went through the procedure in the Op Manual of bleeding the...

I did not work on it Sunday. This morning I towed it up to the barn where I can check on the fuel delievery. I am very basic with mechanics but I can handle the fuel line check and things of that nature for sure. . I will check the fuel tank first by taking loose the fuel line at the squeeze...

(y)

I was operating my 763 on a sloping gravel road. I was headed up hill and the unit quickly lost power and then shut down. I cranked and it would start to hit but then quit. It acted exactly like it had ran out of fuel and the gauge does not work properly so I got 5 gallons of Diesel and started...

Does anyone make an extension to fit the fuel port on my 763 Bobcat. I fill mine with 5 gallon cans and I just cannot do so without a battle. I have used a split radiator hose but it still can leak or come out without persistence. Thanks, Mike

So I still have the axle weights that came off a 863 Bobcat. I need axle weights for a 763 Bobcat. I would like to do a trade. I live in East TN. Not interested in dealing with selling/shipping. Best way to get in contact with me is by email. See my profile. I will be email alerted if a reply...

mmsllc, either email me or reply to this post and we can get in contact if you still have the axle weights. I saw on another thread you are in Virginia.....hopefully not too far North.

What state are you located in? I am in Tennessee.

Yes, the chirps are only when I push the Aux. Hyd. button on the panel and in the code window it shows "none" when I press the light button and hold. The grip buttons are broken internally so it is likely as previous poster said it doesn't recognize the problem. On my way to the dealer to...