Recent content by .50ae

Oops I forgot to check that. Already pulled the machine back in the garage and started draining hydraulics to pull the valve. Machine operation doesn't change while plugged into the auger. Guessing the aux stuck on and the weird hydraulic operation are 2 separate problems. If I pull aux power...

Hey guys sorry I don’t have a whole lot of time to work on this thing just an hour or two when I get it. I drove it out to an auger I have and I hooked up the aux hydraulics to it. They’re definitely stuck on. Auger spins without aux being engaged. If I engage them, actuating the thumb switch...

Figured out the parasitic draw. It was just me not knowing the key had a third position. Goes “acc-off-on-start”. I was just turning the key too far. Switched the hoses so the boom controls work the right way now but they still only move in one direction like the tilt. Boom only goes down and...

Hello guys, so I have an old project 753 I've been fixing up and I'm now working on the hydraulic portion of the many issues. I went through and rebuilt all the cylinders on the machine so no more leaks. Problem im having now is the machine seems to have a parasitic draw. Narrowed it down to one...

Will do. Tried pumping out the old stuff in the hydro tank and adding a gallon of new but It turned milky again when I turned the machine on. Guessing the old stuff in the rest of the system piped back in and mixed with the new

Hey guys new to the forum. Had this project 753 for a week or so now. Got the cylinders all repacked but the hydraulic tank had water in it and the oil is milky. I want to flush the system before I connect the cylinders. Which one of these is the return for the hydraulic fluid? I want to...