Recent content by 1/4 watt

Didn't turn out they best. Had tech come out and connect computer to unit, injector # 1,2 & 3 wouldn't pass the buzz test. Then the HPCR was removed and found metal flakes that came from the HPCR inside. That was the straw that broke the camels back. Installed a complete fuel system that will...

All fuses ohm out. Yes I do ha e the deluxe panel. RPM shows 520 to 560.

Also wanted to Mention when I Unplug the iamb V I also get an error code. I assume the computer Is seeing the IMV?

I will recheck fuses and check fuel. Using same fuel in my 120u case IH. Do you have a link to a fuse panel diagram. My unit didn’t come with a book and fuse panel is unreadable?

No codes, and had charger on boost most of the time while cranking. It does slow the engine down when I unplug the HPCR sensor and crank it over. I’m not familiar with the static test process on injectors. Would appreciate any advice on getting unit up and going it’s my daily silage loader. Also...

Have fuel to high pressure pump and to rail. Could it be the ECU?

2016 T590 with 3000 hrs was running good and shut down for the day and it wouldn’t start next morning. No codes, will crank and sounds like it wants to but no start. Loosened drive belt replaced filter and bypassed bob attach hydraulic system. Also unplugged HPCR sensor to increase pressure and...