Long story short I've got a 773 G series stranded at a customers house. It's got the keyless deluxe panel and I can not get any power at all to anything. This morning I hit the yellow button to wake the machine and it didn't do anything...hit it a few more times and went to password screen...entered pass code and started machine just fine....used machine for a while and shut it down. Got back in machine later to start it and nothing at all. It's got a month old battery which I tested anyway and it's fine. I checked all connections including under the cab and all the fuses and relays. Called the dealer and the service tech told me to check the 100 amp fuse right behind the positive battery cable. I did and it tested good. He also said if the panel was bad it would have some sort of power but I'm not so sure. I was thinking the deluxe panel was probably bad but want to make sure it's not something simple before I have it towed to the stealership for repairs. Any ideas??
773 stranded with no power. Help!
- Thread starter Dixie01
- Start date
antfarmer2
Well-known member
- Joined
- Oct 28, 2013
- Messages
- 2,801
Did you pull and clean the 100 and connections check and clean your hots and grounds sounds like something loose and simple
antfarmer2
Well-known member
- Joined
- Oct 28, 2013
- Messages
- 2,801
Don't forget the the cables to the battery that you just put on
Yep cleaned all battery terminal connections and 100 amp
Yep cleaned all battery terminal connections and 100 amp.
![Pampers Sensitive Baby Wipes, Clinically Proven, Fragrance Free, Unscented, Water Based, Hypoallergenic, Multi-Use, Hand Wipes 336 Wipes Total (6X Flip-Top Packs) [Packaging May Vary]](https://m.media-amazon.com/images/I/41KLBHu9CAL._SL500_.jpg)
antfarmer2
Well-known member
- Joined
- Oct 28, 2013
- Messages
- 2,801
How about to the starter and the main ground
Checked connections at starter and main ground to frame.
antfarmer2
Well-known member
- Joined
- Oct 28, 2013
- Messages
- 2,801
Kick it im out I have a 743 love low tec
antfarmer2
Well-known member
- Joined
- Oct 28, 2013
- Messages
- 2,801
Maybe check the connections on you yellow button
Starter has power. I jumped it to the solenoid and it cranked over.
antfarmer2
Well-known member
- Joined
- Oct 28, 2013
- Messages
- 2,801
Bad connection trace around your yellow button
Makes sense. How to I check connection to yellow button?
antfarmer2
Well-known member
- Joined
- Oct 28, 2013
- Messages
- 2,801
Can't see it from here has to be away to get in there
7LBSSMALLIE
Well-known member
panel feed wire # whatever, its pink and white comes from controller to lft hand panel branches to right, I have a previous post here on this, but ill be dammed if I can find it.
Thanks. I've got a friend that lives close and has a t190 with a regular key pad. If I removed my deluxe panel could I try plugging it into his to see if it has any power? At least that would eliminate the panel being completely dead.
antfarmer2
Well-known member
- Joined
- Oct 28, 2013
- Messages
- 2,801
Sounds like a good idea but wait for someone that knows would hate to see you short something out and cause more damage
Anyone know if this will work? I don't want to risk causing anymore damage just want to help pin point the problem.
Check the fuse box, there may be a bad fuse for the panel, not the 100A one in the back.
Not sure the panel will work, the keyless one is programmed into your computer. I don't believe it will cause any harm, i just don't see it working.....
I've checked all fuses and relays in the fuse box.
