Anyone have one handy? I am trying to help a friend who has a dead S300 and all kinds of other problems. Since my dad died last month and I was taking care of him since last year, I have been too busy to get any projects done. My friend's machine has been sitting over a year and I would like to get it up and running for him.
Help Support SkidSteer Forum:
Zorack
Well-known member
- Joined
- May 27, 2007
- Messages
- 123
You might want to buy a S300 service manual,diagrams are in those(service manuals are a great asset to have for doing work on your Bobcat)
OldMachinist
Well-known member
- Joined
- May 24, 2006
- Messages
- 2,748
What's the serial number of the S300?
I got his diagram but it is on paper and it is a fold out , to copy or scan it then send a email would probally not come out good and be a lot of work ------ buy the book or cd
what I forgot to mention was that most all the machines wiring as far as basics are 90% the same , I look at other models all the time
OldMachinist
Well-known member
- Joined
- May 24, 2006
- Messages
- 2,748
I have pdf versions of the wiring diagrams that are not chopped up scans but I'd like to send him the one for his serial number.
I will check out the machine and get the serial number. Since it is a friend's machine I did not have a manual handy. My machines are all totally different. I know the machine will start by jumping the relays, but the fuses were corroded and I am in the process of cleaning the terminals. I really appreciate the help because I know the schematic will help me find the problems.
*525815966
OldMachinist
Well-known member
- Joined
- May 24, 2006
- Messages
- 2,748
Email sent to the address in your profile.
Thank you so much. This is going to help a friend who has been down on his luck lately.