L 553

[Ivan]

I have something in my fuel tank and it keeps plugging the fuel intake line. I had an alage problem a couple years ago and got that killed out but was wondering if some of the dead stuff is still in the tank. Anyone have any ideas on how to get this stuff out without removing the fuel tank. If I have to remove the tank what is on the cab side of the engine? Is it bolted on with a splines shaft or does the pump come out with the engine? Any help would be apreciated. Thanks Ivan

 

[Mike10]

To remove the tank, raise the loader and block it up. Do not block under wheels because the loader could roll even if the brake is applied. Then remove the skid plate under the tank. Disconnect the hoses and wiring. On the bottom of the tank are four brackets two in the rear and two up front. I would pump the fuel out before lowering the tank. Once those brackets are removed the tank can be lowered.

 

[Ivan]

To remove the tank, raise the loader and block it up. Do not block under wheels because the loader could roll even if the brake is applied. Then remove the skid plate under the tank. Disconnect the hoses and wiring. On the bottom of the tank are four brackets two in the rear and two up front. I would pump the fuel out before lowering the tank. Once those brackets are removed the tank can be lowered.

Thank you. How high does the loader have to be raised?

 

[Mike10]

Thank you. How high does the loader have to be raised?

Sorry for the confusion, I knew what I meant LOL. You need to jack up the main frame so the wheels are off the ground about 6". Block under the frame with jack stands or blocks.