Replace Throttle on New Holland LS140

[RichardL]

Removed the broken throttle and need to know how to feed the new one through-- or does the outside panel need to come off? Appreciate any suggestions.

 

[skidsteer.ca]

Hook it to the old cable casing and use that to pull it through.
Skidsteer.ca

 

[RichardL]

Hook it to the old cable casing and use that to pull it through.
Skidsteer.ca

Tried that-- connection was too large to pull through. Might have to take side fenders off. Thanks for the reply.

 

[skidsteer.ca]

Tried that-- connection was too large to pull through. Might have to take side fenders off. Thanks for the reply.

The fender comes off pretty easy on the 160 anyway, and should give you better access to how the cable snake through the bottom of the cab.
Skidsteer.ca

 

[Earthwerks Unlimited]

The fender comes off pretty easy on the 160 anyway, and should give you better access to how the cable snake through the bottom of the cab.
Skidsteer.ca

On mine using the old one to fish back the new one wasn't possible due to the old on being ziptied to wire harnesses, so the side fender panel had to come off.