jawollbrink
Member
- Joined
- Nov 10, 2010
- Messages
- 8
Hi guys, new to the forum.. I recently bought a cheap L555 deluxe that had been parked for a couple of years. Supposed to have run fine when they parked it. I ended up rebuilding the injection pump on the v1902 kubota and got the engine to run like a top, then I had to add 7 gallon hydro fluid and it drive around good, but my boom isn't working right. The bucket tilt cylinder moved out about 8 inches but wont go in, and the boom goes in a couple inches(can't go anymore cause I have it pinned up in the air) but wont go up. I can hear the pump struggling when I operate it and all of them move about an inch but thats it. Also when I divert to the auxilery I have pressure. I cleaned the suction screen which was a little dirty.... ? What do I look for? I'm not an expert on hydraulics but I have to get this fixed so any ideas are appreciated. Also anyone have pictures on schematics? I can't find much on these machines online, I already bought a 75 dollar manual for the motor and dont want to buy another for the machine.