Has anyone used these on their machine before with a backhoe attachment fitted?
I have a set that came off a 743, was considering fitting it to my 763 when i get it done. I know I'll need to work out some plumbing to hook it all up but was wondering if it was worth the effort or not. I have used the hoe on my 743 and it works pretty well but you do get pulled around and don't have a lot of down pressure. Do the rear stabilizers give you much more pressure? they aren't very far back so i figured if they did it would only be minimal. I know the engine is a different place in the 743 to the 763, so that would change things too.
The hydraulic pressure of the 743 to the 763 means i should have about 20% more power on the 763 over the 743.
Anyone have any experience with this at all?
I have a set that came off a 743, was considering fitting it to my 763 when i get it done. I know I'll need to work out some plumbing to hook it all up but was wondering if it was worth the effort or not. I have used the hoe on my 743 and it works pretty well but you do get pulled around and don't have a lot of down pressure. Do the rear stabilizers give you much more pressure? they aren't very far back so i figured if they did it would only be minimal. I know the engine is a different place in the 743 to the 763, so that would change things too.
The hydraulic pressure of the 743 to the 763 means i should have about 20% more power on the 763 over the 743.
Anyone have any experience with this at all?