2007 T300 control panel beeping

[bobcat07]

We have a 2007 T300 bobcat. We changed the battery and it ran for a few minutes then shut off. We try restarting and the left control panel just beeps and all lights on it flash. We have checked all wiring and fuses and relays no problems there. We replaced the control panel and no change. Has anyone else had this problem? Any ideas on what it could be are greatly appreciated.

 

[fortworth-cowboy]

We have a 2007 T300 bobcat. We changed the battery and it ran for a few minutes then shut off. We try restarting and the left control panel just beeps and all lights on it flash. We have checked all wiring and fuses and relays no problems there. We replaced the control panel and no change. Has anyone else had this problem? Any ideas on what it could be are greatly appreciated.

Do you have a picture or better video of the issue? And can you take a picture of the battery ?

 

[bobcat07]

Do you have a picture or better video of the issue? And can you take a picture of the battery ?

I will try to get that later today. Thank you

 

[bobcat07]

Got a video and was able to see code 2168.3 it says the video is too large to upload

 

[fortworth-cowboy]

ot a video and was able to see code 2168.3 it says the video is too large to upload

2168.3 are the hours from the machine, battery looks good, just wanted to see if these three wires from the ground are connected because they can cause such a fault issue