My 2044 mustang skid steer front bucket keeps tearing out hydraulic hoses, i believe the bucket is hyper extending

[BrendaR]

My 2044 mustang front bucket is extending too far and pulling the hydraulic hoses out of the fittings.
I believe it is because the bumpers are missing,
Where do I find those?

 

[Firefighter]

Thats unusual, make sure the cylinder, top mounts aren't broke, the tube of cylinder itself should not move other than its pivots
back & forth as it extended & retracted. never had one pull hoses because of missing stops

 

[BrendaR]

That's the first thing we thought, so we had the cylinders checked, 1 had a worn seal so it was fixed, we have torn out 2 more within 2 months of each other while digging . They all have pulled out in the retraction, (sorry, its not the extending)

 

[Firefighter]

Might have bad fittings or wrong fittings, assuming they blew out from hi oil pressure to cylinders during retraction. can you post a picture?

 

[BrendaR]

Might have bad fittings or wrong fittings, assuming they blew out from hi oil pressure to cylinders during retraction. can you post a picture?

This is the last hose that pulled out, this 1 had been replaced 2 months ago, the hydraulic fluid was a bit low,

 

[Firefighter]

Looks like the end just blew off from a poor crimp. i would suggest whoever is crimping or making your hose
is not getting a good crimp,. or wrong hose used for the fitting

 

[foton]

this is very true, hose and fittings must be compatiable with each other or this happens , or they will not go together at all .

 

[foton]

let me also say depending on what style compression press they are using ,someone might be using the wrong sleeve compression die.

 

[Mustang Guy]

That fitting was barely crimped. Have a talk with your hoser.