TexasTerex
New member
- Joined
- Sep 25, 2022
- Messages
- 2
Hello All,
I have a 2014 PT110F that has a problem creeping backwards, roughly 2-3 inches, when stopping. This is generally unnoticable until you try to attach a tool or bucket. It makes it very hard to do and requires precise timing to lift the boom and hook the tool on the roll into the bucket.
Does anyone have an idea of what may cause this?
The machine is new to me, so I don't have any real history on it. 2300 hrs. I put new tracks, all the idlers and bogies, 1 of the drive hoses on each side, a few other hoses, new hyd, fluid and filters and a few other things im probably forgetting.
Thanks!
I have a 2014 PT110F that has a problem creeping backwards, roughly 2-3 inches, when stopping. This is generally unnoticable until you try to attach a tool or bucket. It makes it very hard to do and requires precise timing to lift the boom and hook the tool on the roll into the bucket.
Does anyone have an idea of what may cause this?
The machine is new to me, so I don't have any real history on it. 2300 hrs. I put new tracks, all the idlers and bogies, 1 of the drive hoses on each side, a few other hoses, new hyd, fluid and filters and a few other things im probably forgetting.
Thanks!