T320 Purchasing questions

[Tinman03]

I have been looking around for a few months for a CTL to use on the farm and small timber operation to manage roads fire lanes, etc. I will be using the tooth bucket and adding a grapple bucket and a brush cutter. I have located a used one owner 2010 T320 with 1200 hours that runs and operates good with no excessive wear or abuse. What are some things that I need to be looking for in the pre purchase phase that you could advise me on. I have checked the obvious like leaks, general operations, worn parts ,etc. just looking for some advise from experienced owners that can shed some light on this machine.

 

[diyman]

at 1200 hours that machine should be pretty tight all the way around. but look at the tracks to amke sure they arent too tore from operating on concrete or asphalt alot. also maybe ask if they ever used a jack hammer attachment on it. they are very hard on the entire machine especially the pins. but at 1200 hours like i said shouldnt be much wear at all. we had a 2006 T300 and loved it