Hey Im new to the bobcat and this site, would appreciate any help. 743 sat for 7 yrs i did not drain the fuel maybe should have but added 5 gal of fresh with conditioner. pumped the bulb and fuel goes to bypass back to tank. pulled the rubber fuel line off the pump and it pulses but does not have a steady stream? i did not psi test yet? so removed the hard line at first injector and nothing after priming and cranking over. the fuel cutoff lever points away from stop but can that be faulty? take that apart? should fuel flow with primer bulb to the injector even if this was off? how painful is it to remove the injector pump and clean the guts out? thanx for ideas that will save me time