if it truely is an engine op light I would not run it at all. normally the sending units are 10 psi. You better figure this deal out soon or you may end up with a box of rox.
yes that is what they mean..... a vacuum cleaner. it works very well just remember to install your funnel shaped crevise tool or stick a rag over the end of the hose.
If you suspect that the oil in the hoe is contaminated ..... I would under no circumstances let that oil get back to your machine. at least in my machine the return oil doesn't 100% go through the filter on the way back. This is why I have 2 high pressure filters that are connected to ANY rental...
on your machine there are 3 sending units that will light the light . 1 charge pressure switch located under the seat on top of the hydrostat.2 high oil temp located on the port block. 3 plugged filter switch located on the filter mounting housing.
my money is on Tazzi's post- I have had this same trouble after installing a new blower housing. If it is the housing rubbing no big deal just work the machine and it will go away.
Hey you guys finally fixed your forum. I am finally able to sign back in. I forgot my old log in but any ways...... Howdy again and I hope I came back to both of you in good health! SKIDDY