Recent content by hitempguy

Hi all. My T190 with ACS has locked the pedals for lift/tilt. When I activate the loader functions it will not give me a choice between hand and foot control, it just activates hand only, even if the rocker switch is in foot mode. Does it sound like the spool lock solenoid has failed? It works...

Hi All, I am trying to track down parts for a 2003 T190 tandem drive pump with the high flow option. I had a leak (I think) between the gear pump body and the main pump, so I took it to a hydraulic pump repair shop. we are having trouble locating the seal kit for the tandem drive pump. I think...

I know this is an old post, but just noticed it digging through old threads. I had the same issue with my T-190. Besides the extended pump housing, the serial number is a good way to check the Hi Flow option. If your serial number starts with 5198xxxxxx, it should be the series with Hi Flow like...

Hi All, Congrats to Tazza on the 10K posts. You have helped a ton of people, saved marriages and businesses :) My issue is whine sound coming from hydraulics on my T-190 when I push the right control lever forward(sitting in the cab). It whines the loudest at low RPM, light load and at full RPM...

Turbo feels tight, doesn't feel like bushings are worn. I need someone to check to wastegate actuator to make sure it operates when I load it up. Smokes a bit on startup, but no smoke at all when I load it up with a big load of dirt. Doesn't burn/use oil as far as I can tell. 100 hours since oil...

My quote was a little higher, 1800.00ish for the kit, 2400 for the stablizer and brackets

Hmmmm, It is a Turbo already, it just seems to pull down under load quite quickly, ie. I'm going up a small incline (4%)across an acreage(unloaded) and push both levers full forward it will pull down to 1800 rpm and as long as I am going up the incline, it won't pull back up to 2560, maybe 2200...

Anyone install a rear hydraulic kit on their T190? i can't find a parts list or a exploded diagram in my parts book or service manual. Now that the ground is drying out, the clay is almost impossible for my tree spade to push the blades in the ground. I would like to install a rear stabilizer...

Anybody kicked up the ponies in their Bobcat? I would like to get another 5-10 horsepower out of mine. 10 might be asking too much. Bigger injectors? Larger turbo? I think the motor is the V2003 T

here is a link, sounds like the same problem http://www.heavyequipmentforums.com/showthread.php?10849-control-valve-on-bobcat-brand-equipment&s=be952ebbc85f79c0de219faaf1322e3e

How much or how big of a piece of dirt or grit would it take to plug an orfice or cause a problem with the spools? The grapple was a rental, so I don't know if the users cleaned the connections before using it and it already had crap in the lines when I got it. I am pretty anal about cleaning...

The thumb switch will open the grapple, but as soon as I let go of the button the grapple will close, but not with force until I tilt the bucket up or down. The confusing part is sometimes the trigger will open the grapple , then it won't do it again right away. Then the hydraulic system will...

Hi, My T190 has a problem running a grapple. When I click the front button on the right control lever, I can open the grapple, but then it starts closing by itself. It seems the system is short circuiting. I can't close with any force until I tilt the grapple, then the grapples close with just...

My T 190 does the same thing, during scraping with a flat bucket and a heavy load. Look at the small dampening shocks on the steering control arm bars and see if they are leaking oil. They may need replacement, they definetly help with the "bucking" Also on the linkage arms that go back to your...

Thanks, for $800.00 I'm going to take a chance and buy it. Dealer list when I called was $1956.00. All the dealers are closed so I can't cross reference the part numbers. A guy is going to take it in the morning if I don't get a deposit there ASAP.....