Latest activity

What Serial #? That is depending what needs to be removed. You do not need to remove the Freon or the Fuel. The Fuel cooler has a 9/16...

Whistle or whining noise?

SP by these Drive Motors is the Problem, that they can mask an issue. You think you pinpoint the issue but it might as well the other...

Why to rebuilding the Engine? Just a warning, the Delphi Fuel System is very delicate.

Ok, I run into that before too. Tell the Dealer to ask by Lippert.

I have the machine at Bobcat now and the pressure relief I changed is for the Aux Hydraulics. However, this machine has a older style...

I have verified my pump pressure is correct. The drive motor failed internally at the brake housing and I visually verified that as well

My bobcat 341 as a low hydraulic seemingly whistle after it's been running about an hour. Everything seems very sluggish. Hydraulics...

Hello everyone Does any one in here have a 463 engine removal instruction? I have a hydraulic leak between the engine and the...

Here is a link to the parts catalog so you can look up parts with the model number or serial number of your machine instead of digging...

Thanks. Pretty sure it's the shaft seal. I have them on order and will update after that is fixed. Hopefully this will be the last...

So your hydraulic tank level is getting lower over time, no visible leaks to the inside or outside of machine? Drive motor seal...

I have a severe puncture in the hydraulic tank. I need to remove the tank to repair or replace it. Would anyone be able to provide...

My advice would be to rent. Buying and maintaining equipment over the long run is pretty costly for something you are just going to use...

When you say “screw hole in the chain case” where is this screw hole? The only holes in the chain case should be the inspection port in...