Reply to thread

Message: <blockquote data-quote="Bobcatdan" data-source="post: 59631" data-attributes="member: 7339"><p>Pumps locking up was common. They seize and when the cam lobe comes around, it breaks the clamp. I don't think a knick in the roller is a big deal, but look closely at the sealing area for damage, that is the block itself. Unless Deere has come up with a fix since I left, if that is banged up at all, the pump will not seal. The engine block is junk. I replace many pumps and a few engines. I would recommand you call a dealer, the pumps need to be timed with in thousands of easch other or the thing will fall on its face.</p></blockquote><p></p>