I have a 542b s/n 508512075 bobcat. Vandals struck and cut my wiring harness into little pieces. it has a delco starter and alternator which I am familiar with but a distributorless ignition I need help with
tried to take pictures but I couldn't show detail. this is what I have. On starter solenoid there a 3 10guage wires and 11 14guage wire that hook up to battery cable. 1 of the 10 guage wires goes to alternator output. don't know where others go to. does this use a [1] wire alternator? the place where normally there's a [2] wire plug is empty. on the ign coil there's a [3] wire plug[Blk,Grn ,and Red]. on the temp sender [Yell/Grn stripe] Another temp sender to short to tell.oil pressure [2 yellow].I assume a crank sensor too short to tell .Under the intake manifold there's a sender with a red and yellow wire. there a box with Ford E S C on it wih a red' black, Grn w/yell stripe,black,black, red, [2 cut to short to tell,yello w/red stripe,black,and a yellow w/blue stripe All wires cut to about 1in long. 3 connectos under seat area.
