Reply to thread

Message: <blockquote data-quote="cmb7684" data-source="post: 67554" data-attributes="member: 1698"><p>I loosened  the steel tube connection on the cylinder at it had a good bit of fluid leaking out before I tightened it back down. I also watched the cylinder I just repaired extend out when I pressed the pedal to raise the boom so the rod could be put in place to reconnect to the boom. SO now I have no leaks as the leaking cylinder was repaired and the pedal moving freely. I had the left cylinder that was leaking raising and lowering ok without any leaks now while the right one has fluid because it was leaking out when I loosened the steel tube on the right side that has the safety lock. I just cannot get the boom to raise high enough to remove the lock off the right cylinder. I have no idea at this point. Fluid is full. Any more ideas anyone? Im lost on this one.</p></blockquote><p></p>