Reply to thread

Message: <blockquote data-quote="Chandler" data-source="post: 18956" data-attributes="member: 1850"><p>I had a similar situation with my bobcat as you can read on the bobcat thread. I bought the half mounting plate from bradco that goes on my bobcat which was about 135.00 and I had a local welding shop cut off and modify the arms (subframe mount) that go from the backhoe to the bobcat. Just make sure that the arms are down and the backhoe is level when you measure. It saved me about 2/3 the cost of buying a new set from bradco. The subframe mount on my backhoe fit a new holland skid steer and we had to make the arms come up higher and longer to make it work. I carried my bobcat and backhoe to the welding shop so they could make a custom fit and it works fine.</p></blockquote><p></p>