Voltage from controller to panel

[Pegasus757]

2000 773G , three power lines going into computer 12 V , power lines coming out of controller to left-hand panel and right-hand panel 3 volts, does anyone know the correct voltage to the left and right touch panels coming out of the controller . Voltage was checked. With connection disconnected. Have schematic in hand , with knowledge to shoot wires . Thnx in advance. New to forum

 

[7LBSSMALLIE]

should be twelve not unusual for this wire to degrade over time . run a jumper two inches from controller to panel. don forget it branches to rH as well. this will fix it.

 

[Pegasus757]

should be twelve not unusual for this wire to degrade over time . run a jumper two inches from controller to panel. don forget it branches to rH as well. this will fix it.

A big thnx to 7lbssmillie for ur help , up and running, intermittent open in harness from c408 to controller , a 50.00 donation to forum on ur behalf . Thnx again

 

[mmsllc]

A big thnx to 7lbssmillie for ur help , up and running, intermittent open in harness from c408 to controller , a 50.00 donation to forum on ur behalf . Thnx again

I like the idea of donating to the forum when it pans out good. I think you might have just started a trend on here. Good job on the repair!!!

 

[7LBSSMALLIE]

I like the idea of donating to the forum when it pans out good. I think you might have just started a trend on here. Good job on the repair!!!

glad your up and runing. PASS IT ON MY FREIND. m keep the next guy from chasing his tailaybe something like. no or low pwr to lh dash. me I'm not that dude. clear concise. T/S. is what I do. but writining a S/m aint it. maybe you can clear this up and write a post to