Vickers TA1919

[ncplumber]

I've got a Scat Trak 1300HD with a Vickers TA191965R. It has a broken input shaft. Does anyone happen to know the part number of the shaft ? How much trouble is it going to be to remove the shaft ?

 

[Tazza]

Talk to loader parts source, they will have or be able to get that shaft. They are used in Bobcat 743 machines.
To get the shaft out, you will need to disassemble the rear segment of the pump. Not hard to do. remove the rear pump segment, pull out the rotating group, you may need to remove teh swash plate to get to the retianing clip to get the shaft/bearing out. When you are in there, you will see what you need to do.

 

[ncplumber]

Talk to loader parts source, they will have or be able to get that shaft. They are used in Bobcat 743 machines.
To get the shaft out, you will need to disassemble the rear segment of the pump. Not hard to do. remove the rear pump segment, pull out the rotating group, you may need to remove teh swash plate to get to the retianing clip to get the shaft/bearing out. When you are in there, you will see what you need to do.

Thank you. I knew that pump was used on some Bobcats, that's the reason I posted in this sub forum. I have sent an email to LoaderParts, hopefully they will be able to help me. Thanks again.