machine addict
Active member
- Joined
- Dec 2, 2015
- Messages
- 30
When my 2013 380 hits a bump or hard jar, or bad vibration from mower the aux hydraulics turn off. The low flow and enhanced high flow. the only way to reactivate them is to press the operate button off then back on. Its getting vary frustrating because it only works for a few min before it has to be done again. I dont think its the door sensor, lap bar, or in the controllers. I also hard wired the two wires in the plug on the boom for the ehf circite but that cant be it because the roller switch quites working also. Any help would be greatly appreciated.