Reply to thread

Message: <blockquote data-quote="tjacobson01" data-source="post: 118311" data-attributes="member: 9230"><p>I found it is impossible to move a 74X without inserting the valve relief tools (Towing Tool). I have made the necessary tools out of two short lengths of copper pipe, I think probably they were 3/8" about 3 or 4 inches long, you can figure the length out by careful trial and error... be sure to deburr it and clean them up prior to inserting in the Vickers hydrostatic transmission. The hard part is getting the ports open, as on some 74X's they put a line just in front of where you have to unscrew them.</p></blockquote><p></p>