Think I blew up the 763 fork valves

[chuckinnc]

I got the up/dn hoses on left lift cylinder crossed, after blowing the cylinder seals I had them rebuilt. I tried the hydraulic lines before reinstalling the cylinders, both down cylinder lines are pumping oil all the time with pedal is in neutral ? I can move the pedal to lift and the lines switch and pump oil to lift but when pedal returns to neutral is continiously pumps oil out the down lines.

 

[Bswwood]

The entire circuit has charge pressure including cylinders, when you remove a line when running it will be pumping oil out of the lines in neutral position. This is normal for your machine.

 

[Tazza]

The entire circuit has charge pressure including cylinders, when you remove a line when running it will be pumping oil out of the lines in neutral position. This is normal for your machine.

I second that reply. The lines always have pressure in them, even if you aren't operating the controls. Totally normal, you won't blow the control valve up doing this.