M MarcusFirestone New member Joined May 7, 2022 Messages 3 May 7, 2022 #1 The fuel selenoid on my Mustang Skidsteer 2054 will not open. Any suggestions?
F foton Well-known member Joined Mar 1, 2018 Messages 1,572 May 7, 2022 #2 verify that it is getting power when key is on , and as best as I know if they do not work if they are getting power is to buy a new one.
verify that it is getting power when key is on , and as best as I know if they do not work if they are getting power is to buy a new one.
OP OP M MarcusFirestone New member Joined May 7, 2022 Messages 3 May 7, 2022 #3 Do you have any idea where the power comes from computer ignition switch I don't think I'm getting power to the plug where it hooks in
Do you have any idea where the power comes from computer ignition switch I don't think I'm getting power to the plug where it hooks in
F foton Well-known member Joined Mar 1, 2018 Messages 1,572 May 8, 2022 #4 do not know about that but have you checked your fuse box?
OP OP M MarcusFirestone New member Joined May 7, 2022 Messages 3 May 8, 2022 #5 I haven't but I will before I tear it apart.
F Firefighter Well-known member Joined Dec 31, 1969 Messages 266 May 9, 2022 #6 The Control Module Supplies Power to Keep it running , the start circuit pulls solenoid open then once all inputs are met the module supplies voltage to the hold side of coil keep it open
The Control Module Supplies Power to Keep it running , the start circuit pulls solenoid open then once all inputs are met the module supplies voltage to the hold side of coil keep it open
