Reply to thread

Message: <blockquote data-quote="flyerdan" data-source="post: 103590" data-attributes="member: 2510">Your solenoid is fine, if it was bad it wouldn't work with the jumper wire (which is basically what a remote starter switch is).Since you've went through and cleaned up everything at the battery and starter, it's probably in the switch or wire to the solenoid, as mentioned above. If the switch isn't sealed, maybe spray it with some contact cleaner and see if that helps; sometimes a switch will gum up and show full voltage on a test meter until it has to supply any amperage, then the gunk resistance will drop the voltage until you get a solenoid chatter.</blockquote>