Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
T590 Bobcat Will Not Crank
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="tbrouillard" data-source="post: 119544" data-attributes="member: 21755"><p>I have a 2017 T590 bobcat. Long story short, I got it buried in mud, got it out, replaced gas, tested injectors, cleaned it out etc. </p><p></p><p>I got the engine running, however it was giving me low oil pressure. I changed the oil again for 15w40 in lieu of the 10w30. </p><p></p><p>Prior to the change when I had it running before it shut down, I engaged the hydraulics. </p><p></p><p>After changing the oil, the starter would not spin the flywheel. It would engage and just head up the wires. Starter is good. </p><p></p><p>I removed the starter and tried to turn the flywheel by hand. I removed the belt and it will not move. Not even with a pry bar. </p><p></p><p>Engine is Kubota 2607</p><p></p><p>Any thoughts on what the issue could be?</p></blockquote><p></p>
[QUOTE="tbrouillard, post: 119544, member: 21755"] I have a 2017 T590 bobcat. Long story short, I got it buried in mud, got it out, replaced gas, tested injectors, cleaned it out etc. I got the engine running, however it was giving me low oil pressure. I changed the oil again for 15w40 in lieu of the 10w30. Prior to the change when I had it running before it shut down, I engaged the hydraulics. After changing the oil, the starter would not spin the flywheel. It would engage and just head up the wires. Starter is good. I removed the starter and tried to turn the flywheel by hand. I removed the belt and it will not move. Not even with a pry bar. Engine is Kubota 2607 Any thoughts on what the issue could be? [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
T590 Bobcat Will Not Crank
Top