Reply to thread

Message: <blockquote data-quote="Tman0001" data-source="post: 63939" data-attributes="member: 8734"><p>THanks for that input. The bucket does work but not very strong i.e wont tilt all the way and slow to return back to normal position. The lift arm cylinders start to raise about an inch and then stop as if thiers not enough pressure to raise the weight of the assembly. I pulled all the control body valves and inspected for blockage, etc and found nothing wrong. I alst tested each device outside the machine and they are working properly. Im down to a few ideas left. Is it possible the main relief valve failed so suddenly? last week the arms worked fine and suddenly stopped working. I also checked the seat and didnt find any wiring harness to any seat cut off switch so it aappears this isnt a feature of my machine. Its also not shown on the wiring diagram.</p></blockquote><p></p>