T133 - Engine or Head Needed

[SSII28]

The dependable T133 has finally stopped working after many of service. The head gasket seems to be gone or the head is cracked since it is letting coolant into the combustion chamber. The engine is the original V1902B made by Kubota Im wondering if anyone knows where I can get a good head to rebuild myself or a complete engine in great running condition that I can drop in. Thanks

 

[SkidRoe]

Check ebay. You may be able to find the parts you need, or you may be able to find a good used V2203. There are quite a few on there that have been pulled out of old reefer units. HTH.

 

[Tazza]

Check ebay. You may be able to find the parts you need, or you may be able to find a good used V2203. There are quite a few on there that have been pulled out of old reefer units. HTH.

Ebay is possibly your best bet. A head will run you $500+, a complete V2203 runner i think i have seen them for about 2k.
Depending on how bad the cracks are, it can possibly be repaired. I have a few heads that i tried to repair last year. They are still sitting at the cylinder head shop to be tested to see if i did the crack repair right..... Been almost 12 months, glad i'm not in a hurry hey?