Reply to thread

Message: <blockquote data-quote="Fishfiles" data-source="post: 7139" data-attributes="member: 782"><p>I think the travel motor failure sent a load of metal into the sysytem , the bronze case drain rock filter was full to capacity and some must have got thru it , I disassembled the old charge pump and both sections of the pump were trashed , I see bad times for this machine in the furture as I am sure the metal went thru everything ,the pressure relief of the charge sysytem looked to be sandblasted by so much metal being forced thru it , I changed the hydraulic filter when I changed the travel motor and cut it open and it was full of powered metal , ran the machine for a couple days and changed the filter again when I changed the charge pump , it had a lot of trash but not nearly as much the second time , as far as cleaning out the system I don't know what could be down short of total disassembly , which I don't think would be practical , going to let it fly and hope the filters catches all the trash floating around , I am going to change the filter again in about a week cut it open and check it out ,</p></blockquote><p></p>