T 250 auxiliary hydraulic presser relief killed my skid steer and now it will not start

[Danny5692]

My t250 bobcat skid steer has high output auxiliary hydraulics I hooked up auxiliary hose and then pushed the auxiliary relief button to unhook it and it killed it. And now it won't start

 

[antfarmer2]

Sounds like it's loaded up maybe you can relive the pressure out the aux coulpling

 

[Bobcatdan]

Sounds like it's loaded up maybe you can relive the pressure out the aux coulpling

The aux release button will kill the machine, don't know why they have it do that. Not much need for the button, the couplers will relieve pressure by pushing in before uncoupling. Anyways, what I'd your machine doing, not turning over, or turning over but not firing. Any codes being set when trying to start? Need to know this before guess the problem.

 

[reaperman]

After pushing the relief button it will kill the machine. Then you have to push the red stop button (or turn the key off) as if you were shutting the machine down again. Then it should re-start.