Reply to thread

Message: <blockquote data-quote="Fishfiles" data-source="post: 12235" data-attributes="member: 782"><p>Here are some numbers I compiled during a recent job on a T190 travel motor which goes for $2,700, if you have the old style you need to up grade to the newer sprocket as your old one won't work with the new longer housing , the seals and bearings to do a rebuild are right at $1,000 , if the housing is bad which it usually is add another $1,400 for it and if you got old style add a sprocket as the old style housing is no longer available , add a hyd filter and a case drain filter kit , so if the housing is bad it is the same price to rebuild it or buy new , cost of job can be right at $4,000 per side worst case senario , if you catch it before it eats the housing you could get by for about $1,500 , moral of the story is , if you feel or hear anything in the drive motors , stop and have it checked out before you do some real damage</p></blockquote><p></p>