Reply to thread

Message: <blockquote data-quote="bobcat753" data-source="post: 24300" data-attributes="member: 2429"><p>Paul thanks for the advice, I'm starting to think your right on the brake solenoid being the culprit. Today I did the following: 1. Unhooked the seat bar sensor and taped the magnet in the proper location. I think I'm gonna leave it this way! Plan on doing this to the seat sensor as well. 2. Went through all the fuses, added dialectric grease and installed all new fuses. 3. Rotated all the relays around. 4. Checked the wires under the cab yesterday and they looked good. Where I'm at now is it will not move at all. All the lights on the BIC will light up like its ready to go but its still locked. I'll try to move fwd and back a few times and then the traction light will start to blink 3 times. Problem is now I'm half in the garage, half out. Gonna have to hook up my truck and drag it out so I can flip the cab. Is there any point in pulling the solenoid out and taking the wedge out to test it? If I did order one its gonna take a week for me to get it.</p></blockquote><p></p>