Reply to thread

Message: <blockquote data-quote="mhs1492" data-source="post: 99595" data-attributes="member: 14839"><p>My LX565 has issues.... I went to start it after it was unused for several months. The gauges lit up, the pre-heat counted down, and then I turned the key. Click--Dead Battery. So I charged it for a few hours. Went to start it again and.... The gauges flashed for a split second and went dark. I proceeded to start it and it fired right up. When I let go of the key and it went to the on position it died and the starter was still winding nonstop. I removed the key and climbed out and it continued to wind until the battery died. I charged the battery again and the same thing. If I hold the key in the start position is runs fine. when I release the key it dies and the starter continues to wind. Even when the key is out. I replaced the keyed ignition switch. No difference. I replaced the accessory relay. No difference. So before I mess with the solenoid or any other relays I figured I would ask you good people. Any direction? Thanks</p></blockquote><p></p>