Starter r and r on 1967? Bobcat m600

[Rogerriv]

Just attempting to remove the starter from my m600 circa 1967 Wisconsin engine
Anyone able to do this without removing the engine? Thank you for your assistance

 

[nerker]

I have a 630 with the Wisconsin engine. There is a rear mount besides the three front bolts that needs to be removed as well. It is a plate with two smaller machine screws holding the plate. Not fun to get to but it can be done without engine removal. I used a wobbly 3/8 extension on my ratchet to negotiate the confined space. Good luck and be patient.