Visit our tractor and agricultural equipment communities:

Ingersoll Forum Case IH Forum Combine Forum Hay Forum

JCB Forum John Deere Forum Kubota Forum Mahindra Forum

Massey Ferguson Talk New Holland Forum Valtra Forum Yanmar Forum

Zetor Forum Farming Forum

Reply to thread

Help Support SkidSteer Forum:

Message: <blockquote data-quote="mrbb" data-source="post: 122886" data-attributes="member: 13825">here are some basic spec's on a 190 seems like a standard flow is about 16 gpm and high flow at about 27, I would go and compare what your blower requires and see where your at!pending size of blower, you made not have enough GPM of flow or be darn close to the max needed,  if you only have a low flow machine, which can explain your stalling issue's ! I would gather when running the blower you would want to be at FULL throttle at all times! to get max flow rates and power!Most blowers I know of seem to take 14-16  as a min, and as they get larger in size many need way more flowso not knowing what size blower you have or if a high or low flow machine here, justa dding some thinsg to consider![URL unfurl="true"]http://skidsteerspecifications.com/bobcat/T190/[/URL]<h3><a href="http://skidsteerspecifications.com/bobcat/" target="_blank">BOBCAT</a> T190 Specs</h3><ul> <li data-xf-list-type="ul"> <table style='width: 100%'><tr><td>Make</td><td>Bobcat</td></tr><tr><td>Model</td><td>T190</td></tr><tr><td>Type</td><td>Compact Track Loader</td></tr><tr><td>Standard Flow</td><td>16. GPM</td></tr><tr><td>High Flow</td><td>27 GPM</td></tr><tr><td>Pressure</td><td>3300PSI PSI</td></tr><tr><td>Hydraulic HP Standard Flow</td><td>32. HP</td></tr><tr><td>Hydraulic HP High Flow</td><td>50.8 HP</td></tr><tr><td>Engine HP</td><td>66 HP</td></tr><tr><td>Width</td><td>66 (73.9) in.</td></tr><tr><td>Lift Capacity at 35%</td><td>1900 lb.</td></tr><tr><td>Lift Capacity at 50%</td><td>3425. lb.</td></tr><tr><td>Operating Weight</td><td>7775 (7934) lb.</td></tr></table> </li> </ul></blockquote>

Verification