Reply to thread

Message: <blockquote data-quote="Fishfiles" data-source="post: 47308" data-attributes="member: 782"><p>10 (width) x16.5 (rim) is the normal tire on a 763 , but some 763 machines have the 12x16.5 as you can fit them on that machine ,  or do you have some type of specialty tire such as solid , segmented or whatever that may have a different OEM diameter which may effect the speed --------the case drain filter is inside of a round  aluminum casing about 1.5 inch diameter and 3 inches long , there will be one 3/8 inch hose going in and one going out , that machine may have one on the bottom of the hydraulic tank and one on the small hose off of the travel motor , inside is a bronze coloered  rock filter , two springs and a couple of orings , this filter catches the trash , be sure you note how it came apart and put everything back in the same way , the hydraulic filter would be on the top right hand side of the engine compartment --------------if the linkage has a  lot of wear in the bushings and bolts then it might not be getting the full monty ( stroke ) -------------------ever heard of the New Orleans Saints NFL football team , thats my home boys ,  they will be on today at 12 noon and I'll be sucking down some brews " whilts "  eating some boiled shrimp and sticked shrimp on the bar'bie ---------thats for the word of the day</p></blockquote><p></p>