Reply to thread

Message: <blockquote data-quote="mrfixitpaul" data-source="post: 24917" data-attributes="member: 2582"><p>When you have all the parts replaced and are ready to do final adjustment...make sure the 'triangular' arms are tight on the shafts. move the block closest to the spring away from it's arm, adjust the other side for neutral and tighten. then hold the side closest to the spring in neutral and move the block into place and tighten. I found it easiest to do hy putting my feet near the pedals so I can lean my knee against the steering lever to hold in neutral while I use both hands to work on the block and bolts.</p></blockquote><p></p>