Reply to thread

Message: <blockquote data-quote="coreya3212" data-source="post: 24902" data-attributes="member: 2406"><p>Doug, I am sure others will chime in with better info.  I have an 825, and the creep adjustment is done not by adjusting the aluminum blocks them selves, but by adjusting the connecting rod/turnbuckle so that when the machine is running, blocked up you adjust the turn buckle till the wheels dont move with the sticks in the neutral position.  I can tilt my cab forward and still start the machine, so dont know how to help you there.  Your machine may be totally different but god luck.</p></blockquote><p></p>